1N4937RLG　

1N4933, 1N4934, 1N4935, 1N4936, 1N4937 Axial-Lead Glass Passivated Fast Recovery Rectifiers Axial−lead, fast−recovery rectifiers are designed for special applications such as DC power supplies, inverters, converters, ultrasonic systems, choppers, low RF interference and free wheeling diodes. A complete line of fast recovery rectifiers having typical recovery time of 150 nanoseconds providing high efficiency at frequencies to 250 kHz. www.onsemi.com FAST RECOVERY RECTIFIERS 1.0 AMPERE, 50−600 VOLTS Features • Shipped in Plastic Bags; 1,000 per Bag • Available Tape and Reeled; 5,000 per Reel, by Adding a “RL” Suffix to the Part Number • These are Pb−Free Devices* Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 0.4 Gram (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal AXIAL LEAD CASE 59 STYLE 1 Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds • Polarity: Cathode Indicated by Polarity Band MARKING DIAGRAM *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. A 1N493x YYWWG G A =Assembly Location 1N493x =Device Number x= 3, 4, 5, 6 or 7 YY =Year WW =Work Week G =Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information on page 3 of this data sheet. © Semiconductor Components Industries, LLC, 2006 June, 2018 − Rev. 13 1 Publication Order Number: 1N4933/D 1N4933, 1N4934, 1N4935, 1N4936, 1N4937 MAXIMUM RATINGS (Note 1) Rating †Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage †Non−Repetitive Peak Reverse Voltage RMS Reverse Voltage Symbol 1N4933 1N4934 1N4935 1N4936 1N4937 Unit VRRM VRWM VR 50 100 200 400 600 V VRSM VR(RMS) 75 35 150 70 250 140 450 280 650 420 V †Average Rectified Forward Current (Single phase, resistive load, TA = 75°C) (Note 2) †Non−Repetitive Peak Surge Current (Surge applied at rated load conditions) Operating Junction Temperature Range Storage Temperature Range IO 1.0 A IFSM 30 A TJ, Tstg − 65 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Ratings at 25°C ambient temperature unless otherwise specified. 2. Derate by 20% for capacitive loads. THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction−to−Ambient (Typical Printed Circuit Board Mounting) Symbol Max Unit RqJA 65 °C/W ELECTRICAL CHARACTERISTICS Characteristic Symbol Min Typ Max Unit (IF = 3.14 Amp, TJ = 150°C) vF − 1.0 1.2 V (IF = 1.0 Amp, TA = 25°C) VF − 1.05 1.2 V TA = 25°C TA = 100°C IR − − 1.0 50 5.0 100 mA (IF = 1.0 Amp to VR = 30 Vdc) (IFM = 15 Amp, di/dt = 10 A/ms) trr − − 150 175 200 300 ns (IF = 1.0 Amp to VR = 30 Vdc) IRM(REC) − 1.0 2.0 A Instantaneous Forward Voltage Forward Voltage †Reverse Current (Rated DC Voltage) REVERSE RECOVERY CHARACTERISTICS† Reverse Recovery Time Reverse Recovery Current Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. †Indicates JEDEC Registered Data for 1N4933 Series. 1.0E−03 TC = 150°C 1 TC = 150°C IR, REVERSE CURRENT (A) IF, FORWARD CURRENT (A) 10 TC = 125°C 1.0E−04 TC = 125°C 1.0E−05 TC = 100°C 1.0E−06 TC = 100°C 1.0E−07 0.1 0.4 TC = 25°C 0.6 0.8 1 1.4 1.2 1.0E−08 TC = 25°C 0 100 200 300 400 500 VR, REVERSE VOLTAGE (V) VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current www.onsemi.com 2 600 10 IO, AVERAGE FORWARD CURRENT (A) 1N4933, 1N4934, 1N4935, 1N4936, 1N4937 C, CAPACITANCE (pF) TJ = 25°C 1 0 20 40 60 80 100 120 140 160 180 200 1.8 qJA = 65°C/W 1.6 1.4 1.2 DC 1.0 0.8 0.6 0.4 0.2 0 0 VR, REVERSE VOLTAGE (V) 20 40 60 80 100 120 140 160 TA, AMBIENT TEMPERATURE (C) Figure 3. Typical Capacitance Figure 4. Current Derating ORDERING INFORMATION Package Shipping† 1N4933 Axial Lead* 1000 Units / Bag 1N4933G Axial Lead* 1000 Units / Bag 1N4933RL Axial Lead* 5000 / Tape & Reel 1N4933RLG Axial Lead* 5000 / Tape & Reel 1N4934 Axial Lead* 1000 Units / Bag 1N4934G Axial Lead* 1000 Units / Bag 1N4934RL Axial Lead* 5000 / Tape & Reel 1N4934RLG Axial Lead* 5000 / Tape & Reel 1N4935 Axial Lead* 1000 Units / Bag 1N4935G Axial Lead* 1000 Units / Bag 1N4935RL Axial Lead* 5000 / Tape & Reel 1N4935RLG Axial Lead* 5000 / Tape & Reel 1N4936 Axial Lead* 1000 Units / Bag 1N4936G Axial Lead* 1000 Units / Bag 1N4936RL Axial Lead* 5000 / Tape & Reel 1N4936RLG Axial Lead* 5000 / Tape & Reel 1N4937 Axial Lead* 1000 Units / Bag 1N4937G Axial Lead* 1000 Units / Bag 1N4937RL Axial Lead* 5000 / Tape & Reel 1N4937RLG Axial Lead* 5000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb−Free. www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS AXIAL LEAD CASE 59−10 ISSUE U DATE 15 FEB 2005 B K STYLE 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO−41 OUTLINE SHALL APPLY 4. POLARITY DENOTED BY CATHODE BAND. 5. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. D STYLE 2 F A SCALE 1:1 POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES) F K DIM A B D F K INCHES MIN MAX 0.161 0.205 0.079 0.106 0.028 0.034 −−− 0.050 1.000 −−− MILLIMETERS MIN MAX 4.10 5.20 2.00 2.70 0.71 0.86 −−− 1.27 25.40 −−− GENERIC MARKING DIAGRAM* STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE STYLE 2: NO POLARITY A xxx xxx YYWW STYLE 1 xxx A YY WW A xxx xxx YYWW STYLE 2 = Specific Device Code = Assembly Location = Year = Work Week *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. DOCUMENT NUMBER: DESCRIPTION: 98ASB42045B AXIAL LEAD Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative